? preliminary rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 1 of 4 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2102D-083106 sm3838-6 ? low insertion loss ? 3.8 x 3.8 x 1.0 mm surface mount case ? differential input and output ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum input power in passband +23.7 dbm minimum life time at room temperature superior to 50,000 hours under the input power of 23.7dbm in passband. max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c suitable for lead-free soldering - max. soldering profile 260c for 30 s 465.0 mhz saw filter SF2102D notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 w and measured with 50 w net- work analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is dependent on pcb layout and external impedance matching design. see applica- tion note no. 42 for details. 4. the design, manufacturing process, and specifications of this filter are subject to change. 5. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 6. us and international patents may apply. 7. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 8. ?copyright 1999, rf monolithics inc. 9. electrostatic sensitive device. observe precautions for handling. 10. temperature range: +15c to +40c only pb electrical characteristics characteristic sym notes min typ max units center frequency f o 1 465.0 mhz source impedance (single ended) 50 w load impedance (single ended) 50 w absolute attenuation (wrt 0db) 300 khz to 452.5 mhz 40 42 db 452.5 mhz to 457.5 mhz 10 12 452.5 mhz to 457.5 mhz 10 20 22 485 mhz to 507.5 mhz 38 41 507.5 mhz to 1200 mhz 30 33 1200 mhz to 1700 mhz 30 33 1700 mhz to 2000 mhz 10 15 minimum insertion loss in 462.5 mhz -467.5 mhz 2.5 3.8 db input vswr in 462.5 mhz - 467.5 mhz at 25c 2.0:1 2.2:1 output vswr in 462.5 mhz - 467.5 mhz at 25c 2.0:1 2.2:1 input power in 462.5 mhz -467.5 mhz 23.7 dbm operating temperature -10 +85 c case style sm3838-6 3.8 x 3.8 mm nominal footprint lid symbolization (y=year, ww=week, s=shift) dot=pin 1 indicator 602, yyww standard reel quantity reel size 7 inch 1000 pieces/reel reel size 13 inch 3000 pieces/reel
465.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 2 of 4 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2102D-083106 ch2 s 21 log mag ref -8 db 10 db/ center 465.000 000 mhz span 100.000 000 mhz cor prm 11 may 2006 10:26:16 1 1_:-3.0233 db 465.000 000 mhz SF2102D demo3 resp ch1 s 21 log mag 1 db/ ref -3 db cor prm ch2 s 21 log mag ref -3 db 1 db/ center 465.000 000 mhz span 20.000 000 mhz cor prm 11 may 2006 10:27:01 1 2 3 4 1_ 0 db 0.000 000 mhz ref=1 bw: 8.129 778 mhz cent: 465.450727 mhz q: 57.253 1_ loss: -3.0276 db 1 2 3 4 1_: 0 db 0.000 000 mhz ref=1 bw: 9.024 621 mhz cent: 465.548245 mhz q: 51.586 1_ loss: -3.0276 db SF2102D demo3 resp resp
465.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 3 of 4 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2102D-083106 tape and reel specifications ?b ? nominal size quantity per reel inches millimeters 7 178 1000 13 330 3000 see detail "a" 13.0 20.2 2.0 12.0 100 ref. "b" ref. component orientation and dimensions carrier tape dimensions ao 4.25 mm bo 4.25 mm ko 1.60 mm pitch 8.0 mm w 12.0 mm ro.3 (max.) ko section a-a 0.3 0.05 section b-b bo 2.0 4.0 ao pitch b b a r0.5 (max.) a 5.5 12.0 1.75 1.5 1.50 pin #1 user direction of feed
465.00 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 4 of 4 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2102D-083106 6-terminal ceramic surface-mount case 3.8 x 3.8 mm nominal footprint case dimensions dimension mm inches min nom max min nom max a 3.60 3.80 4.0 0.14 0.15 0.16 b 3.60 3.80 4.0 0.14 0.15 0.16 c 1.30 1.50 1.70 0.05 0.06 0.067 d 0.95 1.10 1.25 0.037 0.043 0.05 e 2.39 2.54 2.69 0.090 0.10 0.110 g 0.90 1.0 1.10 0.035 0.04 0.043 h 1.90 2.0 2.10 0.75 0.08 0.83 i 0.50 0.6 0.70 0.020 0.024 0.028 j 1.70 1.8 1.90 0.067 0.07 0.075 sm3838-6 case top view bottom view 0.055 typ. (1.40) 0.036 (0.91) 0.029 typ. (0.74) 0.066 (1.68) 0.050 typ. (1.27) 0.176 ref. (4.47) 0.129 ref. (3.28) pcb footprint 1 2 3 6 5 4 1 2 3 6 5 4 a b c d j e g h i 6 0 2 y y w w materials solder pad termination au plating 30 - 60 inches (76.2-152 m) over 80-200 inches (203-508 m) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phos- phorus) 100-200 inches thick body al 2 o 3 ceramic pb free electrical connections connection terminals port 1 single ended input 2 port 2 single ended output 5 ground all others single ended operation only dot indicates pin 1
|
